PAINT

It is a water-based single component ready to use latex anti-corrosive rust converter-cum primer which serves a protective dark black anti-corrosive coating on the rusted reinforcement (TMT-Rebar) surface etc.

It can be directly applied on the rusted reinforcement (TMT-rebars) surface etc. without sand-blasting, sort-blasting, wire-brushing, sand-papering, grinding or any types of rust removing process for long-term anti-corrosive application.

After its application, no paint or primer coating is required for concreting. Besides, after its application on rusted rebars it protect the reinforcement (TMT-rebars) from further rusting without concreting for next 12* to 18* month’s & after concreting 65*-70* year’s above.

PREBOND-110 is another unique solution to rust removing, sand-blasting, wire-brushing, sand-papering and applying epoxy paint process for rusted reinforcement (TMT-bar).

It is an ideally suited to applications where rust removing, wire-brushing, sand-papering or sand-blasting & surface preparation is a problem and is not practical or very expensive.

It is a single component, nanotechnology-based high-temperature resistance pigmented fast drying heat resistance DTM (direct to metal) aluminum paint, formulated with recently invented polymer & resins which can sustain heat up-to 600⁰ C. It does not require any special techniques or primer before its application. After application, it gives finished & glossy smoothness.

Besides, its excellent resistance of acid/alkali fumes, along with weather, water, salt water, moisture & U/v resistance and gives more than 02*-03* years’ metal protection life even in continuous heat process i.e. 600⁰C. without causing any damage to the metal.

It covers 07 to 08 m² areas in per liter which is more than other silicon heat resistance paints and cost wise economic too.

It is a multi-purpose paint suitable to all your requirements, especially in heat & acid/alkali fumes resistance for all types of factory metals, chimneys, boilers, furnaces, ovens, pipelines, marine areas, MS storage tank, transmission towers, and highly corrosive area etc.

It is a single component nano-technology based water repellent & acid repellent ready to use DTM (direct to metal) fast drying acid/alkali, water, salt-water & corrosion resistance paint for all types of newly & old factory painted metal structures, factory shades, pipelines, storage tanks, ladder/platforms, legged angles, vessels, battery rooms, duct collector, cooling tower, marine areas, transmission towers, ETP plant, petrochemicals plants, pharmaceutical plants, bridge, export items as well as RCC (wall/concrete) surface etc.  

Exceptionally, it is the best and ideal paint to repeated structural painted as well as RCC (wall/concrete) repairs problem with its excellent resistance such as acid/alkali/solvent and chemicals fumes, water, salt water, U/v, weather and highly corrosive area for long-term anti corrosive applications.

It resists heat up-to 135⁰ C with excellent resistance of corrosion for next 18*-24* month’s in a highly acidic environment and non-acidic environment at-least 03* to 04* years more. It covers 06* to 07* m² per liter which is more than other epoxies, PU, enamel or acid/alkali resistant paints and cost wise economic too.

It saves time, repeated purchased paint cost & repeated structural painting cost with excellent result. After application, it gives finished and glossy smoothness.

It is a multi-purpose paint suitable to all your requirements of corrosion resistance applications especially, in all types of factory metal structures, shades, pipelines, tanks as well as RCC (wall) surface etc. 

We have provides a diverse range of anti-corrosive coating & acid resistance coating services for all types of industrial factory shades, beams, storage tanks, structures, pipelines as well as RCC (wall/concrete) surface etc. with our all types of own manufacturing coating, chemicals and our well equipped technical applicators with complete 03*-04* years company warranty.

It is a single component nano-technology based water repellent & acid repellent ready to use DTM (direct to metal) fast drying acid/alkali, water, salt-water & corrosion resistance paint for all types of newly & old factory painted metal structures, factory shades, pipelines, storage tanks, ladder/platforms, legged angles, vessels, battery rooms, duct collector, cooling tower, marine areas, transmission towers, ETP plant, petrochemicals plants, pharmaceutical plants, bridge, export items as well as RCC (wall/concrete) surface etc.

Exceptionally,it is the best and ideal paint to repeated structural painted as well as RCC (wall/concrete) repairs problem with its excellent resistance such as acid/alkali/solvent and chemicals fumes, water, salt water, U/v, weather and highly corrosive area for long-term anti-corrosive applications.

It resists heat up-to 135⁰ C with excellent resistance of corrosion for next 18*-24* month’s in a highly acidic environment and non-acidic environment at-least 03* to 04* years more. It covers 06* to 07* m² per liter which is more than other epoxies, PU, enamel or acid/alkali resistant paints and cost wise economic too.

It saves time, repeated purchased paint cost & repeated structural painting cost with excellent result. After application, it gives finished and glossy smoothness.

It is a multi-purpose paint suitable to all your requirements of corrosion resistance applications especially, in all types of factory metal structures, shades, pipelines, tanks as well as RCC (wall) surface etc.

It is a single component nano-technology based water repellent & acid repellent ready to use DTM (direct to metal) fast drying acid/alkali, water, salt-water & corrosion resistance paint for all types of newly & old factory painted metal structures, factory shades, pipelines, storage tanks, ladder/platforms, legged angles, vessels, battery rooms, duct collector, cooling tower, marine areas, transmission towers, ETP plant, petrochemicals plants, pharmaceutical plants, bridge, export items as well as RCC (wall/concrete) surface etc.

Exceptionally,it is the best and ideal paint to repeated structural painted as well as RCC (wall/concrete) repairs problem with its excellent resistance such as acid/alkali/solvent and chemicals fumes, water, salt water, U/v, weather and highly corrosive area for long-term anti corrosive applications.

It resists heat up-to 135⁰ C with excellent resistance of corrosion for next 18*-24* month’s in a highly acidic environment and non-acidic environment at-least 03* to 04* years more. It covers 06* to 07* m² per liter which is more than other epoxies, PU, enamel or acid/alkali resistant paints and cost wise economic too.

It saves time, repeated purchased paint cost & repeated structural painting cost with excellent result. After application, it gives finished and glossy smoothness.

It is a multi-purpose paint suitable to all your requirements of corrosion resistance applications especially, in all types of factory metal structures, shades, pipelines, tanks as well as RCC (wall) surface etc.

It is a single component nano-technology based water repellent & acid repellent ready to use DTM (direct to metal) fast drying acid/alkali, water, salt-water & corrosion resistance paint for all types of newly & old factory painted metal structures, factory shades, pipelines, storage tanks, ladder/platforms, legged angles, vessels, battery rooms, duct collector, cooling tower, marine areas, transmission towers, ETP plant, petrochemicals plants, pharmaceutical plants, bridge, export items as well as RCC (wall/concrete) surface etc.

Exceptionally,it is the best and ideal paint to repeated structural painted as well as RCC (wall/concrete) repairs problem with its excellent resistance such as acid/alkali/solvent and chemicals fumes, water, salt water, U/v, weather and highly corrosive area for long-term anti-corrosive applications.

It resists heat up-to 135⁰ C with excellent resistance of corrosion for next 18*-24* month’s in a highly acidic environment and non-acidic environment at-least 03* to 04* years more. It covers 06* to 07* m² per liter which is more than other epoxies, PU, enamel or acid/alkali resistant paints and cost wise economic too.

It saves time, repeated purchased paint cost & repeated structural painting cost with excellent result. After application, it gives finished and glossy smoothness.

It is a multi-purpose paint suitable to all your requirements of corrosion resistance applications especially, in all types of factory metal structures, shades, pipelines, tanks as well as RCC (wall) surface etc

It is a water-based single component latex rust converter-cum epoxy metal primer which serves a protective dark black anti-corrosive coating on rusted metal structures for painting, rusted pipelines, rusted storage tanks as well as rusted reinforcement (TMT-rebar) surface etc.

It can be directly applied on the rusted metals, rusted pipelines, rusted storage tanks as well as rusted reinforcement (TMT Re-bars) surface etc. without any types of rust removing, sand-blasting, sort-blasting, wire-brushing, sandpapering or grinding process etc. for the long-term anti-corrosive application.
After its application, no red-oxide primer coating is required for painting.

After its application, it protects the painted metal surface from further rusting for next 04*-05* years & without painting at least 12*-18* months with proper application.
After its application, any types of paint like, (epoxy, enamel, PU etc.) can be directly applied on the metal surface without red-oxide primer application.
The product is eco-friendly and poses no danger of side-effects.

PREBOND-110 is another unique solution to sand-blasting, sand-papering, wire-brushing, grinding, rust removing & applying red-oxide primer process for newly fabricated structures, old rusted structures for painting as a well anti-corrosive epoxy coating for rusted reinforcement surface.

It is ideally suited to applications, where rust removing or sand-blasting is a problem & it is not practical or expensive.

It covers 100-150 sq. ft.areas in per liter which is more than other rust converter or red-oxide primer and cost wise economic too for all types of rust removing applications.

It is very economic in term of rust removing, sand-blasting, labor, thinner and red-oxide primer cost.

It is highly recommended for industrial rusted painting structures, rusted pipelines, rusted storage tanks & rusted reinforcement (TMT Re-bars) surface for long-term anti-corrosive applications.

PREBOND-110 Rust Converter has passed the IS 13515: 1992 for Grade-1 (Rust Convertor-cum Primer) as laid down by Bureau of Indian Standards.

PRODUCT NAME: PREBOND-135 (Water Based Metal Primer)

PRODUCT DESCRIPTION: It is an ideal water-based fast drying anti-corrosive metal primer, formulated by heavy duty anti-corrosive resin & pigment based primer. This primer renders excellent protection to steel structures, beams, channels, shades, storage tanks, pipelines, sand/short blasted metals & steel storage items etc. It dries even at a low temperature in just a few minutes and gives smooth & glossy finishes. It is great replacement of oil based metal primer & save the thinner cost with time.

It is a single component nano-technology based DTM (Direct to Metal) ready to use fast drying water repellent, & acid/alkali, sewage water repellent, self cleaning, salt-water resistance, anti fungus, hull cleaning , corrosion resistance & anti-fouling coating, its specially design for marine application for long-term anti-fouling as well as marine applications.

Exceptionally, it is the best and ideal mono-coat paint system to repeated ship, boat deck, hull, checker plates, ship structures, bridges structures painting and repeated maintenance problems with its excellent resistance such as water, salt-water, moisture, anti-fouling, anti fungus & corrosion resistance application.

It resists high heat up-to 135⁰ C along with cold water in certain temperature i.e. below 05⁰ C with excellent resistance to corrosion & fouling for next 10*-12* months. It covers 06* to 07* m² per liter which is more than other epoxies, PU or marine, anti-fouling paints and cost wise economic too.

It saves time, labor cost, primer cost and repeated painting cost with excellent result. After application, it gives finished and glossy smoothness. It is a multi-purpose paint suitable for all your requirements of corrosion resistance applications, especially in marine areas.